Inlet pipes, Linkert carburetors and parts - All models

Showing 1–24 of 130 results


0110201	PIPE, inlet, with nuts/packing ring, 1937-57, WL/G
0110221	PIPE, inlet, 1937-48, U/UL sidevalve
0110701	PIPE, inlet, only, 1937-52, WL/G
0110900	EXTENSION, inlet pipe,1937-52, WL/G, NOS
0110901	EXTENSION, inlet pipe,1937-52, WL/G
0110902	EXTENSION, inlet pipe, aluminium, 1937-52, WL/G
0111021	SUPPORT, carburetor,1939-48, U/UL sidevalve, park
0111022	SUPPORT, carburetor,1941-47, E/EL, park
0111100	SUPPORT, carburetor, 1937-52, WL/G, park
0111101	SUPPORT, carburetor, 1937-52, WL/G, zinc
0111102	SUPPORT, carburetor, 1937-52, WL/G, chrome
0111201	NIPPLE, inlet, 1932-52, DL/WL/G
0111202	NIPPLE, inlet, 1932-52, WLDR/UL
0111203	NIPPLE, inlet, 1936-39, E/EL
0111501	NUT, inlet packing, 1932-52, DL/WL/G, white plated
0111502	NUT, inlet packing, 1932-52, DL/WL/G, chrome
0111503	NUT, inlet packing, 1932-52, DL/ WL/G, park
0111521	NUT, inlet packing, set of 2, 1936-39 E/EL and WLDR/UL sidevalves,all years white plated
0111522	NUT, inlet packing, with brass ring, set of 4, 1940-54 OHV models
0111523	NUT, inlet packing,, set of 2, 1940-54 OHV models
0111801	BUSHING, inlet packing,1930-52, RL/DL/WL/G
0111802	BUSHING, inlet packing, 1936-39 E/ELand UL/WLDR, allyears
0112101	GASKET, carburetor to manifold, for 1.1/4 carburetor, all models, 3 pack
0112102	GASKET, carburetor to manifold, for M16/18 Indian and XA carburetor
0112121	GASKET, carburetor to manifold, E/ELFL, 1940-UP ALL 4 BOLT LINKERTS, 5 pack
0112122	SPACER, carb. 4 bolt, for M74B
0112301	BOLT, carburetor fastening, short, all models, 10 pack, park
0112302	BOLT, carburetor fastening, long for use with extension, all models, 10 pack, park
0112304	BOLT, carburetor fastening, standard, all models, 10 pack, Park
0112305	BOLT/washer, carburetor, set of 4, all linkert models, white plated
0113301	Carburator, M88 linkert, cmpt. used for military models
0113301GR	Carburator, M88 linkert, cmpt. late style (green, 1944 up)
0113401	Carburator, M5 Linkert, cmpt. used for 11936-39 OHV
0113403	Carburator, M51 Linkert, venturi 1-1/16, Fits all UL sidevalve models
0113403L	Carburator, M51L Linkert, venturi 1-1/8, Fits all UL sidevalve models
0119601	PIN, float lever, all linkert models
0119603	SCREW/PIN +1197-16, set of 2, all linkert models
0119604	SCREW/PIN+1197-16, oversize PIN, set of 2, all linkert models
0119701	SCREW, float lever, all linkert models
0120001	GASKET, set, carburetor and oil bath air cleaner, WLA/WLC models
0122601	Carburator, M88 linkert, body,for military models
0122602	Carburator, Linkert, body, All externally vented models
0123101	SHAFT, air intake, with screws, 1933-52, all sidevalves
0123121	SHAFT, air intake, E/EL/FL 1938-1957 linkert carburetor
0123201	DISC, air intake, all sidevalves
0123301	LEVER, air intake (choke), for 7 “round aircleaner, WL/UL/G, chrome 1941-up style
0123302	LEVER, air intake (choke), military type, WLA/WLC, for M88
0123302CH	LEVER, air intake (choke), military type, WLA/WLC, for M88, CHROME
0123304	LEVER, air intake for 7 INCH aircleaner, WL/UL/G, white plated 1941-up style
0123305	LEVER, air intake (choke), for use with snout aircleaner,1933-47, VL/RL/UL/WL/G
0123321	LEVER AND ROD +1233-38, lever and rod, air intake (choke), set, 1938-47, E/EL/FL
0123401	SCREW, air intake (choke) lever, all linkert models, white plated
0123401P	SCREW, air intake (choke) lever, all linkert models, park
0123521	STOPDISC, air intake (choke) lever,1936-57, E/EL,FL , linkert
0123800	CONNECTION, cable to lever, with screw , 1936-57, all models
0123801	LEVER, throttle, with screws, 1937-52, WL/UL with aluminum heads
0123802	SCREWS, throttle lever, set of 3, all models, 10 pack
0123803	LEVER, throttle, with screws, low type, 1933-52, VL and UL/RL/WL with iron heads
0123804	LEVER, throttle, with screws, correct for panhead 1948, fits E/EL knuckleheads too
0123805	LEVER, +27260-49, throttle lever kit, 1949-up, WL/ EL/FL linkerts
0124201	SHAFT, throttle, with lower seal, for 1″ carburetor, M16/M18,
0124301	SHAFT, throttle, with screws, for 1.1/4″ carburetor (M88/M51 etc.)
0124302	SHAFT, throttle, with lower seal, for 1.1/2″ carburetor, E/EL/FL
0124303	SHAFT, throttle, for 1.1/2″ carburetor, E/EL/FL
0124304	SHAFT, throttle, with lower seal for 1.1/4″ carburetor (M88/M51 etc.)
0124400	DISC, throttle, for 1.1/4″ carburetor, WL/UL/and early E/EL, NOS
0124401	DISC, throttle, for 1.1/4″ carburetor, WL/UL/and early E/EL
0124402	DISC, throttle, for 1.1/2″ carburetor, E/EL/FL 1940 up
0124403	DISC, throttle, for 1.1/2″ carburetor, 9-X marking,for M74/M74B panhead
0124404	DISC, throttle, for 1.1/4″ carburetor, +030″ O.S., WL/UL
0124405	DISC, throttle, for 1.1/2″ carburetor, +030″ O.S., E/EL/FL
0124406	DISC, throttle, for 1.1/2″ carburetor, 9-X marking, +030″ O.S.,for M74/M74B
0124407	DISC, throttle, 30,1 mm (1,19″), no.12, 1″ carbs
0124408	DISC, throttle, 31mm (1,19″), no10 for 1″ carburetor
0124409	DISC, throttle, 31 mm (1,22″), +030″OS, no marking, for schebler carb
0124501	BUSHING, throttle shaft, all models
0124701	SPRING, throttle shaft, all models
0124801	SCREW, high speed needle valve lock,1940-52, M88
0124901	JET, fixed, no. 1, 052″ hole, M88
0125101	PLUG, idle passage, all models
0125102	PLUG, idle passage, Indian linkert carburetor
0125401	NEEDLE, high speed , adjustable, 1.1/4″ linkert carburetor
0125402	NEEDLE, high speed , fixed jet,1940-52 M88
0125403	NEEDLE, high speed , adjustable, E/EL/FL, 1940-1948
0125404	NEEDLE ,high speed , adjustable, long tread for worn carburetor, all 1.1/4″ carburetors
0125405	NEEDLE, high speed , adjustable, long tread for worn carburetor, M88
0125407	NEEDLE, high speed, adjustable, for 1″ schleber and linkert carburetor
0125421	NEEDLE, high speed, M74/M74B linkerts
0125701	SPRING, nozzle retainer, all models
0125801	NOZZLE, main , side valve carburetor, all models
0125802	NOZZLE, main, WR pattern
0125811	NOZZLE ,main , E/EL/FL for M35, M36 LINKERT
0126101	NEEDLE. low speed complete, 1933-47, 1.1/4″ linkert carburetor
0126102	NEEDLE, low speed , needle only, 1927-47, 1.1/4″ linkert carburetor
0126103	SPRING, low speed needle, all linkert carburetors, 5 pack
0126201	COLLAR, spring, all models
0126301	PLUG, drill, all models, 10 pack
0126401	SPRING, needle valve, all models
0126501	VENTURI, 1.1/16″, external vent, M5/M41/M51 etc., WLD and 74″ sidevalves
0126502	VENTURI, 15/16″, internal vent, M88, WL/WLA/WLC

1 2

Showing 1–24 of 130 results